Burnt Scarlet Striker Tint Bullseye Sheet 1823 3MM
- Description
- Working Notes
-
Sold as a Handy Sheet, which is approximately 280 x 250 x 3mm*
THIS IS A STRIKING COLOUR, which means that it requires heat from a kiln to mature to the colour shown.
Many colours in Bullseye's range that are striking colours may appear pale or even colourless when you receive them. The colours mature to a target colour when fired in a kiln at the right temperature.Not recommended for Stained Glass or Mosaics.
Compatible with COE090.
*The dimensions may vary slightly depending on the sheet -
Striker
This style may not reveal (strike to) its target colour until fired.
Cold Characteristics
Appears almost clear with blue/green tints.
Working Notes
Colour usually deepens on firing. Possible dark interface reaction with selenium and/or sulphur glasses (000137, 001122, 001125, 000124, 000125, 001137, 001437). Less viscous (softer) than most other glasses. Some gold-bearing striking glasses, like this one, should be fired with a 2-hour hold at 1225°F during the initial stages of the firing cycle. If fired without this hold, they may not strike at all, or they may strike but appear spotty and have a blue-brown cast, as opposed to the desired target colour. This full-fuse schedule effectively strikes these glasses:
This full-fuse schedule effectively strikes these glasses:
*The initial rate of heat is not a critical factor in successfully striking gold-bearing glasses. Choose an initial rate of heat appropriate to the scale and design of the project that you are firing.
**The remainder of the cycle depends on the thickness of the piece. Consult the Bullseye Annealing Chart. For colour-sensitive projects, we recommend testing the cycle you plan to use by fusing a small sample of a similar setup in the same kiln as the project to best predict final colour results.