Violet Striker 1234

Transparent Bullseye Sheet is available in 2mm thickness.

The standard sheet in 2mm (thin)  is approximately 250 x 210 x 2mm  (the dimensions may vary slightly depending on the sheet)

Compatible with COE090. 

Contains

Lead

May React With

Selenium, Sulfur

Cold Characteristics

A deep royal blue colour.

Working Notes

Colour usually deepens on firing. Possible dark interface reaction with selenium and/or sulfur glasses (000137, 001122, 001125, 000124, 000125, 001137, 001437). Less viscous (softer) than most other glasses. Some gold-bearing striking glasses, like this one, should be fired with a 2 hour hold at 1225°F during the initial stages of the firing cycle. If fired without this hold, they may not strike at all, or they may strike but appear spotty and have a blue-brown cast, as opposed to the desired target color. This full-fuse schedule effectively strikes these glasses:

* The initial rate of heat is not a critical factor in successfully striking gold-bearing glasses. Choose an initial rate of heat appropriate to the scale and design of the project that you are firing.

** Remainder of cycle depends on the thickness of the piece. Consult the Bullseye Annealing Chart. For color-sensitive projects, we recommend testing the cycle you plan to use by fusing a small sample of a similar setup in the same kiln as the project to best predict final color results.