0345 Steel Jade
Bullseye sheet is available in 2mm(thin) or 3mm thickness.
The standard sheet in 3mm is approximately 280 x 250 x 3mm (the dimensions may vary slightly depending on the sheet)
The standard sheet in 2mm (thin) is approximately 250 x 210 x 2mm (the dimensions may vary slightly depending on the sheet)
Compatible with COE090.
May React With
Selenium, Sulfur, Reactive (000009, 001009, 001019)
At tack fusing and slumping temperatures, the surface frequently develops a metallic gray film, similar to effects with Steel Blue Opalescent (000146). This may disappear at full fusing temperatures. Cap with clear to insure a consistent opal green through the clear layer. To maintain the metallic effect, extend hold times at tack fusing or slumping temperatures. The metallic layer may develop anywhere where 000345 is exposed and can change over the course of multiple firings. It ranges from a thin glossy gray to a thicker, matte metallic.
A yellow residue on shelf releases such as primer and Thinfire may occur when firing to a full fuse or hotter. Scrape & apply fresh primer, or remove used Thinfire and replace with new to avoid possible contamination in subsequent firings.
The exposed surface of 000345 has greater sensitivity to items such as glass cleaner, marker and Glastac. Traces of these liquids, which often fire cleanly, may be visible in fired works, even when wiped away before firing. To minimize this effect, reduce the contact time between the glass and possible contaminants. Also, avoid using Glastac on the surface.
Fusible / Bullseye-compatible.