Ruby Red Striker Tint Bullseye Powder 1824
- Description
- Working Notes
- Firing Schedule
-
Bullseye 1824 Ruby Red Striker Tint frit offers a transparent ruby-red tint that develops from a nearly clear, faint blue-green appearance into a rich warm red during firing, suitable for a wide range of fused glass applications. Powder grade frit melts quickly and evenly, producing a flat, paint-like surface when full fused.
This frit is produced from crushed, screened, and magnetically cleaned Bullseye-compatible sheet glass to ensure consistency and compatibility within the Bullseye COE 90 system.
Available sizes:
• 30 gram sample
• 200 gram jar
• 500 gram jarFusible / Bullseye-compatible (COE090)
-
Striker
This style may not reveal (strike to) its target colour until fired.
Cold Characteristics
Appears close to clear with blue/green tints in raw form.
Working Notes
Colour usually deepens on firing. Possible dark interface reaction with selenium and/or sulphur glasses (000137, 001122, 001125, 000124, 000125, 001137, 001437). Less viscous (softer) than most other glasses. Some gold-bearing striking glasses, like this one, should be fired with a 2-hour hold at 1225°F during the initial stages of the firing cycle. If fired without this hold, they may not strike at all, or they may strike but appear spotty and have a blue-brown cast, as opposed to the desired target colour.
-
This full-fuse schedule effectively strikes these glasses:
*The initial rate of heat is not a critical factor in successfully striking gold-bearing glasses. Choose an initial rate of heat appropriate to the scale and design of the project that you are firing.
**The remainder of the cycle depends on the thickness of the piece. Consult the Bullseye Annealing Chart. For colour-sensitive projects, we recommend testing the cycle you plan to use by fusing a small sample of a similar setup in the same kiln as the project to best predict final colour results.
