Gold Purple Striker Transparent Bullseye Fine Frit 1334
- Description
- Working Notes
- Firing Schedule
-
Bullseye 1334 Gold Purple Striker Transparent frit offers a rich transparent purple tone that develops during firing, producing vibrant and dynamic colour effects in fused glass designs. Fine grade frit offers excellent control with minimal surface texture.
This frit is produced from crushed, screened, and magnetically cleaned Bullseye-compatible sheet glass to ensure consistency and compatibility within the Bullseye COE 90 system.
Available sizes:
• 30 gram sample
• 200 gram jar
• 500 gram jarFusible / Bullseye-compatible (COE090)
-
Striker
This style may not reveal (strike to) its target colour until fired.
Contains
Lead
May React With
Selenium, Sulfur
Cold Characteristics
Appears as a dark transparent. It may appear to be blue.
Working Notes
Colour usually deepens on firing. Possible dark interface reaction with selenium and/or sulphur glasses (000137, 001122, 001125, 000124, 000125, 001137, 001437). Less viscous (softer) than most other glasses. Some gold-bearing striking glasses, like this one, should be fired with a 2-hour hold at 1225°F during the initial stages of the firing cycle. If fired without this hold, they may not strike at all, or they may strike but appear spotty and have a blue-brown cast, as opposed to the desired target colour. This full-fuse schedule effectively strikes these glasses:
* The initial rate of heat is not a critical factor in successfully striking gold-bearing glasses. Choose an initial rate of heat appropriate to the scale and design of the project that you are firing.
** The remainder of the cycle depends on the thickness of the piece. Consult the Bullseye Annealing Chart. For colour-sensitive projects, we recommend testing the cycle you plan to use by fusing a small sample of a similar setup in the same kiln as the project to best predict final colour results.
