Tools

Hemostats can be used for making buttons, small pendants or off mandrel sculptures. Holding the hemostat shaft makes it easier to rotate. Available...

Named after sculptural genius Loren Stump. One long side has a radius on its edge. The opposite side has a radius that tapers to a point at the end...

6mm Solid Mandrel. Sold as an individual mandrel. Can be used for creating pandora beads.  

2mm Solid Mandrel approximately 22.5cm in length  Available in packs of 10 or 30

123mm  tweezers with short pointed tweezers.

There are three tools: 1. Double ended brush tool for cleaning bead holes. 2. Regular diameter (2.4mm) Spiral cut wire tool for cleaning bead holes...

Excellent for holding and pulling hot glass. Non serated to not leave a pattern in the glass. Available in 4 sizes Small - 15.2cm Medium - 20.3cm    

Used to for making cone shaped beads, such as bead caps, end caps to collect multiple strings of beads, bugle beads and vessel shapes.  We grind th...

2.54cm (1") diameter Mandrel approximately 30cm in length  Sold as a single mandrel.

4mm Solid Mandrel. Sold as an individual mandrel. Can be used for creating pandora beads.  

The quality BBQ mashers are  30.5cm long with rubber handles and flat, thick, 5cm square stainless steel mashing surfaces. There is an adjustable s...

These tools dispense frit, powdered glass and enamels by shaking, tapping, or for the greatest control, by moving the Coil Actuator. It is incredib...

5mm Solid Mandrel. Sold as an individual mandrel. Can be used for creating pandora beads.  

Available in 2 styles. Black and Gold handles.  Black handled shears have a 6.8cm cutting blade and are 19cm in length from tip of blade to end of ...

1.6mm stainless steel (316) Solid Mandrel approximately 22.4cm in length  Available in packs of 10 or 30

2.4mm Solid Mandrel approximately 22.4cm in length  Available in packs of 10 or 30

These round Cabochon Mandrels come in 10 diameters. They feature a thicker 3.96mm handle for more a comfortable grip and are 23cm in length.  

Brass head is 22mm x 46mm with a 150mm Stainless Steel handle. High quality Australian made Stumpers.

Large bag of Vermiculite for putting your beads into. Bag is enough to fill a paint tin or to put a decent layer in a bucket. 

Graphite shaping tool for making lentil bean shaped beads. One side has lipped edge for thicker lentil beads Graphite Lentil Shaper - 5x7.5cm. Lent...

Tweezers with stainless steel pads for mashing glass flat. They are 20.4cm in length with 2.5cm square pads.  

Flat masher with vein impression

Impresses a vein into the glass and helps create the curve

A highly versatile shaping tools ideal for bi-cones, cones and vessel shapes.  

Perforated stainless steel creates a hobnail pattern. Makes an excellent pattern for plain transparent beads.

The latest, upgraded Hot Head bead making torch - perfect for 104 COE glass.Developed and designed exclusively for the beadmaking industry, this t...

Roll your hot glass across the fins to easily create a grooved pattern. The other side is flat and is used as a smooth marvering surface.

  Add hot water to the mix to create a mild acid etch for your glass. Sent as crystals as this is the safest method for shipping.  Available in a s...

Graphite Desk Pad Large 155mm x 155mm x 10mm (thickness may vary slightly) 

The 70 F style frame comes in smoke gray, equipped with side shields. The frame has a comfortable fit and has been a safety glass industry standard...

The graphite (Carbon) rods are available in the following diameters (image shows these from top to bottom in the following order) 3mm (1/8") note t...

I have a number of sizes of hollow mandrels or blowing tubes. Sold as an individual mandrel. Based on outside diameter: 3mm (thin wall) 3.2mm 4mm ...

This adaptor converts the thread on the HotHead to be compatible with Australia's connections. It will connect directly from the Hot Head to a Prim...