What's New in tools

JC Line & Dot Applicators. These tools dispense frit, powdered glass and enamels by shaking, tapping, or for the greatest control, by moving th...

These tools dispense frit, powdered glass and enamels by shaking, tapping, or for the greatest control, by moving the Coil Actuator. It is incredib...

Roll and form perfect round beads and marbles with our round bead mould.Bead/Marble sizes are 10, 13, 16, 19 & 25mm. A mandrel groove is cut ac...

1.58cm (5/8") diameter Mandrel approximately 30cm in length. Used for creating Rings - this would be equivalent to an P size ring - with additional...

These mashers are constructed of 1mm thick, polished stainless steel.The pads are approximately 31 x 38mm (1-1/4" x 1-1/2") and 1mm thick.They are ...

The hose connects directly to a hot head with no adaptors required. It will go straight onto a larger gas bottle.  Primus hose used as an extensio...

The hose connects directly to a hot head with no adaptors required. It will go straight onto a larger gas bottle.  High quality stainless steel br...

The vein pattern is hand cut on each tweezers for a realistic, natural look. The tweezers are 17.8cm long. The size allows for great headpin tips, ...

These clever little mashers press a blob of molten glass into a delicate, bead scale fish fin, two fin bones wide at a time. Just heat the glass an...

Designed by Marshall and Caitlin Hyde, both instructors of the Corning Museum of Glass. The all brass mashers are 25mm wide with a parallel gap of ...

This is a genuine CGBeads graphite mould. 4mm mandrel slot with 7 Cavity sizes (mm):10x13.511x1512x16.513x1814x19.515x2116x22.5

This is a genuine CGBeads graphite mould. The graphite mould has 3 cavity sizes (mm): 17x38, 18x43, 19x48 Mandrel slots take up to 4mm

For making glass components at the end of straight or looped wires, commonly used in broaches, bangles and pendants. Made from an extra strong sta...

Strong gripping regular hemostats, that hold wire loops for making buttons, leaves, flowers and other small glass items and components very well.  ...

This is a genuine CGBeads graphite mould. This is not a flat texture tool. The concave trough adds a twisted texture to the curve of a donut bead. ...

This is a genuine CGBead graphite mould. CAVITY SIZES (mm):Oval: 11x28Barrel: 14x14Disc: 15x6Round: 14 Mandrel slots take up to 4mm

This is a genuine CGBeads graphite mould. 4mm mandrel slotCAVITY SIZES (mm):Offset Bicone: 15x25  Hexagon: 16x20Bicone: 15x25  Stubby Bicone: 17x12...

This is a genuine CGBeads graphite mould. 4mm mandrel slotCAVITY SIZES (mm):Barrel: 14x48Olive: 15x20Drop: 15X9Cone: 15x17Fancy Bicone: 15x26Baroqu...

This is a genuine CGBeads graphite mould. Holds Murrini from sliding off and rolling away.25 cavities: 6mm to 12mmshaping lentil: 25mm x 5mm

This is a genuine CGBeads graphite mould. 2.5mm mandrel slot with Cavity sizes (mm):Oval: 4x7, 5x8, 6x9Barrel: 4x4, 5x5, 6x6Disc: 5x2, 6x2, 7x2.5Ro...

The mini Jacks can be used to ream open the smallest opening using one of the triangle shaped blades and moving in and out of the flame. Use the ou...