0301 Pink Stringer

$5.35
Or 10 interest free payments from $0.53 on orders over $20 with What's this?

Threads of glass pulled from re-melted Bullseye Compatible sheet. For use in kilnforming or torchworking.

Stringers come in 1 mm thicknesses and are approximately 451 mm long.

We have them available in a pack of 10 or in a tube of approximately 120 pieces. The tubes are a clear plastic cylinder 457 mm long and 19 mm in diameter.

Bullseye is 90COE and isn't compatible with Effetre or Vetrofond Rods. Annealing Temperature range is 505- 520 Celsius.

Cold Characteristics

Palest pink with a slight blue cast.

Working Notes

Torch: Strike this glass to pink by working it in the flame, then cooling it just outside of the flame and then gradually reheating it. Once struck it should be medium to dark pink while it is still hot. If the glass looks white, continue to cool and gradually reheat the glass until it strikes. The pink is easier to strike if it has been worked in a cooler flame to begin with; try to work with it farther out in the flame, away from the nozzle. When molten, this glass has a low viscosity and can be quite soft, which may result in a blurred edge where it meets other glasses. We advise labeling all striking glasses.

Kiln: Not recommended to be used in fused work.